Liam Steel is a reputable manufacturer and supplier located in Manila, Philippines, known for its top-notch Copper C10300 Bars and Rods. With a strong focus on precision and quality, Liam Steel guarantees that their copper products adhere to rigorous industry standards for both performance and durability. Their Copper C10300 bars and rods are crafted to cater to a wide range of industrial and electrical applications, offering reliable solutions for manufacturers and engineers across the Philippines and surrounding areas. Liam Steel is dedicated to providing consistent quality, prompt service, and ensuring customer satisfaction with every order.
Copper C10300, often referred to as Copper Tellurium, is an alloy that mainly consists of copper with about 0.5% tellurium added. This enhancement significantly boosts the material’s strength and hardness while still allowing for excellent electrical conductivity, typically around 90-95% IACS. The alloy showcases tensile strength between 250 to 350 MPa and boasts remarkable wear resistance and machinability. Its enhanced mechanical properties and corrosion resistance make it ideal for challenging environments where superior strength and conductivity are essential.
| Specifications | ASTM B187, ASTM B301 / ASME SB187, SB301 |
| Range | 3.17 MM TO 350 MM DIA |
| Form | Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc. |
| Copper Grades | C10300 |
| Treatment | Maximum* | Minimum* |
|---|---|---|
| * Temperature is measured in Fahrenheit. | ||
| Hot Working Temperature | 1600 | 1400 |
| Annealing | 1200 | 700 |
| Alloy Designation | |
|---|---|
| DIN CEN/TS 13388 | CW021A |
| EN | Cu-HCP |
| UNS | C10300 |
| Typical values in annealed temper at 20 °C | |||
|---|---|---|---|
| Thermal expansion coefficient | 20 .. 300 °C | 16.9 | 10-6/K |
| Density | 8.92 g/cm³ | ||
| Thermal conductivity | 385 | W/(m·K) | |
| Modulus of elasticity | GPa | 130 | GPa |
| Specific heat capacity | 0.385 J/(g·K) | ||
| Electrical conductivity | IACS | 98 % | |
| Electrical conductivity | MS/m | 57 | MS/m |
| Thermal coefficient of electrical resistance | (0 .. 100 °C) | 3.7 | 10-3/K |
| Mechanical Properties (EN 1652) | ||||||
| Tensile Strength Rm | Hardness HV * | Temper | Yield Strength Minimum Rp0.2 | Elongation Minimum A50mm | Bending 90° gw bw rel. Bending Radius R/T | |
|---|---|---|---|---|---|---|
| MPa | HV | MPa % | Strip Thickness ≤ 0.50mm | |||
| ≥ 360 | ≥ 110 | R360 | 320 | 2 | 0 | 0.5 |
| 240 .. 300 | 65 .. 95 | R240 | 180 | 8 | 0 | 0 |
| 220 .. 260 | 40 .. 65 | R220 | ≤ 140 * | 33 | 0 | 0 |
| 290 .. 360 | 90 .. 110 | R290 | 250 | 4 | 0 | 0 |
To select the right Copper C10300 Bars and Rods, consider factors such as conductivity, corrosion resistance, strength requirements, and the specific environmental conditions of your application.
Yes, Copper C10300 Bars and Rods are fully recyclable, retaining their properties even after recycling, making them an eco-friendly option for sustainable industrial applications.
Yes, Copper C10300 Bars and Rods can be used for potable water applications due to their corrosion resistance, antimicrobial properties, and compliance with drinking water standards.
Copper C10300 bars and rods find extensive use in electrical components like connectors, switches, and relays, where added strength is crucial without sacrificing conductivity. They are also utilized in welding electrodes, resistance welding parts, and various industrial applications that demand durability and electrical performance. Liam Steel’s Copper C10300 bars offer a reliable material choice for manufacturers looking to achieve a perfect balance of strength and conductivity in their copper components.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Isis Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Manila, Philippines
Copyright 2024 Isis Metals. All rights reserved
