Isis Metals stands out as a reliable manufacturer and supplier of Inconel 601 Forgings right in Manila, Philippines. They specialize in top-notch nickel-chromium alloys that are specifically designed to handle high temperatures and resist oxidation. Inconel 601 is well-known for its remarkable mechanical strength and its ability to fend off corrosion, even in extreme thermal conditions. The forgings crafted by Isis Metals are made with precision, ensuring they provide long-lasting stability and durability in tough environments like chemical plants, power generation facilities, and heat treatment operations. Committed to upholding international standards, Isis Metals guarantees that each Inconel 601 forging delivers exceptional reliability, performance, and longevity across a variety of industrial applications.
Inconel 601 Forgings are mainly made up of Nickel (58–63%), Chromium (21–25%), and Iron (the balance), along with small amounts of Aluminum, Carbon, and Silicon that boost oxidation resistance. This alloy showcases impressive mechanical strength, boasting a tensile strength of about 650 MPa and a yield strength of 300 MPa, while maintaining stability at temperatures up to 1200°C. It excels in resisting oxidation, carburization, and aqueous corrosion. The aluminum content helps create a tightly bonded oxide layer that enhances durability, and its superior metallurgical stability ensures it lasts in high-stress, high-temperature settings.
Specifications ASTM B564 / ASME SB564, AMS 5665
Flat bar blocks up to 27″ width and 15,000 lbs.
Cylinders and sleeves up to 50″ maximum O.D. and 65″ maximum length
Discs and hubs up to 50″ diameter and 20,000 lbs.
Rolled, hand forged or mandrel forged rings up to 84″ maximum O.D. and 40″ maximum length
Rounds, shafts and step shafts up to 144″ maximum length and 20,000 lbs.
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 601 | 0.10 max | 1.0 max | 0.5 max | 0.015 max | 1.0 max | Balance | 58.0 – 63.0 | 21.0 – 25.0 |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.1 g/cm3 | 1411 °C (2571 °F) | Psi – 80,000 , MPa – 550 | Psi – 30,000 , MPa – 205 | 30 % |
| STANDARD | UNS | WNR. | AFNOR | EN | JIS | BS | GOST | OR |
| Alloy 601 | N06601 | 2.4851 | NiCr23Fe | NiCr15Fe | NCF 601 | NA 49 | XH60BT | ЭИ868 |
Temperature control ensures uniform heating, preserving the microstructure and mechanical properties of forged Inconel 601. Inadequate control can lead to defects, reduced strength, and compromised performance in high-temperature applications.
Inconel 601 forgings are produced through a combination of hot working and controlled cooling, typically involving heating to high temperatures followed by forging to shape. Post-forging, the material undergoes heat treatment to optimize strength and enhance corrosion resistance.
To improve the surface finish of forged Inconel 601 parts, you can use methods such as polishing, grinding, or shot blasting. Additionally, applying a protective coating or performing heat treatments can help enhance surface smoothness and reduce oxidation.
Inconel 601 Forgings find their place in various industries that demand materials capable of withstanding extreme heat and oxidizing conditions. They are perfect for furnace components, heat exchangers, gas turbine parts, and equipment used in petrochemical processes. In the power generation industry, you’ll find them in boiler tubes, burner nozzles, and steam superheaters, where resistance to thermal fatigue is essential. The alloy’s outstanding oxidation resistance also makes it a great fit for aerospace and heat treatment applications.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Isis Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Manila, Philippines
Copyright 2024 Isis Metals. All rights reserved
