Isis Metals, located in Manila, Philippines, stands out as a leading manufacturer and supplier of top-notch Aluminium 7075 Forgings. Renowned for their precision and exceptional craftsmanship, this company creates forged aluminum components that adhere to the highest industry standards. Aluminium 7075 is a heat-treatable alloy celebrated for its remarkable strength, toughness, and resistance to fatigue, making it a perfect fit for aerospace, military, and high-performance engineering applications. At Isis Metals, advanced forging technologies and rigorous quality controls are employed to guarantee that their Aluminium 7075 forgings provide outstanding mechanical performance and reliability, even in the toughest environments.
Aluminium 7075 Forgings are primarily made of aluminum alloyed with zinc (5.1–6.1%), magnesium (2.1–2.9%), and copper (1.2–2.0%), along with trace amounts of chromium to enhance corrosion resistance. This unique blend results in tensile strengths typically ranging from 480 to 570 MPa, along with excellent fatigue and fracture toughness. The alloy is heat-treatable and can be forged to optimize its grain structure and mechanical properties. While it may have slightly lower corrosion resistance compared to other alloys, surface treatments like anodizing significantly boost its durability.
Standards : ASTM B247, B247
Temper : H14
Specification : DIN, ASTM, BS and all International Standards
Flat bar blocks : up to 27″ width and 15,000 lbs.
Cylinders and sleeves : up to 50″ maximum O.D. and 65″ maximum length
Discs and hubs : up to 50″ diameter and 20,000 lbs.
Rolled, hand forged or mandrel forged rings : up to 84″ maximum O.D. and 40″ maximum length
Rounds, shafts and step shafts : up to 144″ maximum length and 20,000 lbs.
| Weight % | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Each | Total |
| Minimum | 1.20 | 2.10 | 0.18 | 5.10 | ||||||
| Maximum | 0.40 | 0.50 | 2.00 | 0.30 | 2.90 | 0.28 | 6.10 | 0.20 | 0.05 | 0.15 |
| Temper | Tensile | Hardness | ||||
| Ultimate | Yield | Elongation | Brinell | |||
| KSI | MPA | KSI | MPA | % | ||
| T6, T651 | 83 | 572 | 73 | 503 | 11 | 150 |
| T73, T7351 | 73 | 503 | 63 | 434 | 13 | N/A |
| UNS | EN | DIN,WNr | JIS | AFNOR | ISO | BS | GOST |
| A97075 | ENAW-AlZn5.5MgCu EN AW-7075 | 3.4365 AlZnMgCu1.5 | 7075 | 7075 A-Z5GU | AlZn6MgCu | 7075 L95 L96 | V95 |
Yes, Aluminum 7075 can be forged into shapes with tight tolerances. Its high strength allows for precise shaping, but careful control of temperature and pressure is required for optimal results.
Aluminum 7075 offers high strength, excellent fatigue resistance, low weight, good machinability, and corrosion resistance, making it ideal for custom forgings in aerospace, military, and high-performance applications.
These Aluminium 7075 Forgings are extensively used in aerospace structural components, aircraft fittings, and military gear due to their impressive strength-to-weight ratio. They also find their way into high-performance automotive parts, sports equipment, and precision machinery that demand durability and fatigue resistance. Furthermore, this alloy is utilized in marine and defense sectors where strength and toughness are paramount. With its outstanding blend of mechanical properties and reliability, Aluminium 7075 continues to be a preferred choice for advanced forging applications.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Isis Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Manila, Philippines
Copyright 2024 Isis Metals. All rights reserved
