Isis Metals is a premier producer and distributor of Carbon Steel EN-9 Rods and Bars, renowned for their immense strength, toughness, and resistance to wear. We are dedicated to providing high-quality EN-9 products that can satisfy the tough requirements of industries like engineering, construction, and automobile. All EN-9 Rods and Bars go through rigorous quality control procedures to guarantee uniform performance and reliability. With our excellence, innovation, and customer-centric approach, Isis Metals offers superior steel solutions that are in international standards and beyond expectations. We are your most reliable partner for reliable and high-performance Carbon Steel EN-9 products.
Carbon Steel EN-9 Rods and Bars are produced according to the highest industry standards. The standard chemical composition contains carbon (0.35–0.45%), manganese (0.60–0.90%), phosphorus (max 0.05%), sulfur (max 0.05%), and trace elements. This well-balanced composition gives the material excellent hardness, strength, and wear resistance. Mechanically, EN-9 has a tensile strength of 650–850 MPa and yield strength of approximately 350 MPa, with good machinability and hardenability. These characteristics of EN-9 Bars and Rods make them suitable for heavy load applications, high-stress applications, and abrasive environments where toughness and strength are vital.
| Grade | 070M55 / EN-9 |
|---|---|
| Specification | BS 970 1991 |
| Round Bar Size | Diameter: 3-~800mm |
| Square Bar size | 4 to 100mm |
| Flat Bar Size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Hex Bar Size | 2-100mm A/F |
| Rectangles Size | 33 x 30mm to 295 x 1066mm |
| Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Angle Bar Size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| Section | 3.0 to 12.0mm thickness |
| Billet Size | 1/2″ to 495mm Diameter |
| Finish | Cold (bright) drawn, centreless ground,smooth turned, Rough Turned, Bright, peeled, hot rolled, hot rolled annealed, slit rolled edge, Polish, Grinding, Centreless Ground & Black |
| Tolerance | K9, K10, K11, K12, H8, H9, H10, H11, H12, H13, or as per clients’ requirements |
| Surface | Polished, Bright, Cold Drawn, Hot Rolled Pickled, Sand Blasting Finished, Hairline |
| Condition | Hardened & Tempered, Annealed |
| Technique | en9 Hot Rolled, Cold Rolled, Cold Drawn, Forged Round Bar, Rods |
| Processing | Bar cutting to 650mm |
| Form | en9 Welding Rod, Round, Round Rod, Rings, Hollow, Rod, T-Bar, Channel Bar, Flat Bar, Square, Blocks, Precision Ground Bar, Triangle, Rectangle, Hex (A/F), Threaded, Ingot, I/H Bar, Half Round Bar, Profiles, Billet, Forging etc. |
| EN9 / 070M55 Bars and Rods Conforms To NACE MR0175/ISO 15156 | |
| Grade | Cr | C | Ni | Si | S | Mn | P | Mo |
| EN – 9 | – | .50 – .60 | – | .05 – .35 | .040 MAX | .50 – .80 | .040 MAX | – |
| Heat Treatment | Condition Tons/SQ.inch | Tensile Stress RE MPA | RP0.2 MPA | A min on 5.65so | Impac | Hardness HB | Limited Ruling Section mm | |
| IZODFT.L.b | KCV Joules | |||||||
| Normalise | 45 | 700 | – | 12 | – | – | 201-255 | 63 |
| 39 | 600 | – | 13 | – | – | 170/223 | 250 | |
| R | 45/55 | 700/850 | 385 | 14 | – | – | 201/277 | 100 |
| S | 50/60 | 775/925 | 450 | 14 | – | – | 223/277 | 63 |
| T | 55/65 | 850/1000 | 555 | 12 | – | – | 248/302 | 19 |
| Standard | CS EN-9 |
| UNS | – |
| WERKSTOFF NR. | CK55 |
| BS | 070M55 |
| IS | C55 |
| JIS | – |
| EN | EN9 |
| SAE/AISI | 1055 |
Carbon Steel EN-9 is commonly used for manufacturing bolts, nuts, fasteners, and structural components in heavy-duty applications like automotive and construction industries.
EN-9 offers excellent tensile strength, wear resistance, and hardenability, making it suitable for components subjected to mechanical stresses and heavy-duty environments.
Yes, Carbon Steel EN-9 can be heat-treated to enhance its hardness and strength, making it versatile for various engineering applications.
Carbon Steel EN-9 Bars and Rods find broad applications in high-strength, tough, and wear-resistant applications. EN-9 Bars and Rods are suitable for producing mechanical parts like shafts, gears, bolts, nuts, couplings, fasteners, and axles for heavy load operations. EN-9 is also applied in the manufacturing of structural parts, machine components, and farm equipment subject to mechanical stress and abrasion. Its superior hardenability and toughness content make it a choice for applications in the automotive, construction, and general engineering sectors. Withstanding heavy loads without a loss of properties under service conditions, EN-9 Bars and Rods are a reliable solution for high-stress operating conditions.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Isis Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Manila, Philippines
Copyright 2024 Isis Metals. All rights reserved
